Featurecraft’s decorative plywood panel is suitable as an interior wall and ceiling system. This product can be perforated for acoustic performance, is impact resistant, and comes in a range of timber species.
Plywood Panel
Pre-finished
Finished in Natural (Sealed with clear-coat flat varnish) or
Custom (Various stains and washes are available on request)
All panels are finished in our factory, located in Hawkes Bay, New Zealand
Perforated: 1mm Felt (available in various colours)
Non-perforated: Nothing
B/BB (A higher grade can be achieved by applying a cleaner grade timber veneer to the surface of the panel)
2400 x 1200mm
2700 x 1200mm
3000 x 1200mm
Custom sizes available
Application: Interior Walls, Interior Ceilings, Exterior Soffits, Ceiling Tiles (We can alter panel sizes to fit within ceiling grids)
Installation Methods: Adhesive Fix, Concealed Fix, Exposed Screw Fix
10 Years
Perforation Options: Slots, holes, grooves, custom patterns and designs
The perforations are machined completely through the panel and staple backed with felt backing (available in various colours)
Visit our Perforation Library to get inspired by our perforation offerings
For maximum acoustic performance we recommend that panels are installed over 20 -100mm acoustic blanket. NRC values of up to 0.95 are achievable, depending on the perforation pattern and panel thickness
Green Building Rating Compliance: Refer to specsheet
Sustainability Options: FSC® Chain of Custody and PEFC™ Certification are available on request
Hoop Pine: Super E0
Birch, Poplar, Radiata Pine: No Reading
Plywood Panels can be screw-fixed onto timber-framed or steel-framed walls. Most walls have battens or studs at 600 centers and we recommend fixing around the top and bottom edges at 250 centres and the side edges & through the middle of the sheet at 440mm centres – see typical screw fix pattern for 2400 x 1200 sheets. Download PDF here
Screw fix can be used when there is 3-4mm gap between the sheets. Recommended screws are 6 or 8 gauge stainless steel countersunk wood screws 30mm long. Screw can be stainless steel or powder-coated to match the face of the panel if required.
Screw fix is recommended for acoustic panels as these have the felt backing which limits the use of construction adhesive.
Refer to screw fix installation for best practices.
Suspended ceiling installation includes Rondo suspended ceiling systems.
